Radio / CD / MP3
Modena MP54
Sevilla MP54
7 644 260 310
7 644 262 310
Operating instructions
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
17
3
CONTROLS
1
2
3
4
Button to switch the device on/
off and operate the volume mute
feature.
9
:
MENU button to open the basic
settings menu.
OK button to confirm menu en-
tries and activate the scan func-
tion.
button for opening the de-
tachable control panel (flip-re-
lease panel).
;
<
=
Keys 4 - 6
RDS button to switch the RDS
function on/off (Radio Data Sys-
tem).
Display
TRAF button to switch traffic in-
formation standby on/off.
BND button (Band) to switch to
radio mode,
to select the FM memory banks
and the MW and LW wave-
bands.
>
AUDIO button to adjust the
bass, treble, balance and fader.
For selecting an equalizer pre-
set.
?
@
X-BASS button to activate/deac-
tivate and adjust the X-BASS
feature.
TS to start the Travelstore func-
tion.
5
6
7
8
Volume control
Keys 1 - 3
SRC button to switch between
the CD/MP3, CD changer (if
connected) and AUX sources.
Arrow buttons
DIS to change the display con-
tent.
A
button to eject the CD from
the device.
35
CONTENTS
Notes and accessories ............. 37 MP3 mode ................................. 53
Preparing an MP3-CD ...................... 53
Switching to MP3 mode ................... 55
Selecting a directory......................... 55
Detachable control panel.......... 38
Switching on/off ....................... 39
Selecting tracks/files ........................ 55
Fast searching ................................. 55
Random track play (MIX) .................. 55
Scanning tracks (SCAN) .................. 56
Repeating individual tracks or
whole directories (REPEAT) ............. 56
Pausing playback (PAUSE)............... 56
Configuring the display ..................... 56
Adjusting the volume ................ 40
Radio mode............................... 43
Adjusting the tuner settings .............. 43
Switching to radio mode ................... 43
Convenient RDS functions ............... 43
Selecting the waveband / memory
bank................................................. 44
Tuning into a station.......................... 44
Setting the sensitivity of station
seek tuning....................................... 45
Storing stations ................................ 45
Storing stations automatically
(Travelstore) ..................................... 45
Listening to stored stations ............... 46
Scanning receivable stations (SCAN) . 46
Setting the scanning time ................. 46
Programme type (PTY) ..................... 46
Optimising radio reception................ 48
Configuring the display ..................... 48
CD-changer mode .................... 58
Switching to CD-changer mode........ 58
Selecting CDs .................................. 58
Selecting tracks ............................... 58
Fast searching (audible) ................... 58
Changing the display ........................ 58
Repeating individual tracks or
whole CDs (REPEAT)....................... 58
Random track play (MIX) .................. 59
Scanning all tracks on all CDs
(SCAN) ............................................ 59
Pausing playback (PAUSE)............... 59
Traffic information..................... 48
CLOCK - Time ........................... 60
Sound........................................ 61
X-BASS ..................................... 62
Configuring the level display .... 63
Adjusting the brightness
(dimmer) ................................... 63
Adjusting the viewing angle ...... 63
External audio sources ............. 64
TMC for dynamic navigation
systems ..................................... 64
Specifications ........................... 65
Installation instructions........... 283
CD mode ................................... 49
Switching to CD mode ..................... 49
Selecting tracks ............................... 50
Fast track selection .......................... 50
Fast searching (audible) ................... 50
Random track play (MIX) .................. 50
Scanning tracks (SCAN) .................. 50
Repeating tracks (REPEAT) .............. 51
Pausing playback (PAUSE)............... 51
Changing the display ........................ 51
Displaying CD text............................ 51
Naming CDs .................................... 52
Traffic announcements in CD mode .. 53
Ejecting a CD................................... 53
36
NOTES AND ACCESSORIES
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Installation
If you want to install your car sound sys-
tem yourself, please read the installa-
tion and connection instructions that
follow these operating instructions.
Please read these operating instruc-
tions before using the equipment for
the first time.
Accessories
Only use accessories approved by Blau-
punkt.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any Remote control
questions on how to operate the device,
please contact your dealer or the tele-
phone hotline for your country. You will
find the telephone number printed at the
back of this booklet.
The optional RC08 or RC10 remote
control allows you to access the most
important functions of your car sound
system safely and conveniently from
your steering wheel.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
or ask for them directly at:
You cannot switch the device on/off us-
ing the remote control.
Amplifiers
You can use all Blaupunkt and Velocity
amplifiers.
Blaupunkt GmbH, Hotline CM/PSS,
Robert Bosch Str. 200,
D-31139 Hildesheim
Germany
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 08, IDC A 09 and CDC A 03.
Road safety
Compact Drive MP3
Road safety has absolute prior-
ity. Only operate your car sound sys-
tem if the road and traffic conditions
allow you to do so. Familiarise your-
self with the device before setting off
on your journey.
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, listen to
your car sound system at a reason-
able volume level during your jour-
ney.
You can connect the Compact Drive MP3
instead of a CD-changer in order to play
MP3 music tracks. If you decide to connect
a Compact Drive MP3, you will first need to
use a computer to store the MP3 music
tracks on the Microdrive™ hard disk that is
inside the Compact Drive MP3. Then, when
the Compact Drive MP3 is connected to the
car sound system, you can play the tracks
like normal CD music tracks. You can oper-
ate the Compact Drive MP3 in the same way
as a CD changer. Most of the CD-changer
functions can also be used with the Com-
pact Drive MP3.
37
DETACHABLE CONTROL PANEL
Detachable control panel
(flip-release panel)
Theft protection
The device is equipped with a detacha-
ble control panel (flip-release panel) as
a way of protecting your equipment
against theft. The device is worthless
to a thief without this control panel.
Note:
● The device will switch off after a
particular time period configured by
you. For further details, read the
section entitled “OFF TIMER” in
this chapter.
Protect your device against theft by tak-
ing the control panel with you whenev-
er you leave your vehicle. Do not leave
the control panel inside your vehicle -
not even in a hiding place.
● All the current settings are saved.
● Any CD already inserted in the de-
The control panel has been designed
to be easy to use.
vice remains there.
Attaching the control panel
Note:
● Never drop the control panel.
● Hold the control panel at approxi-
● Never expose the control panel to
direct sunlight or other heat sourc-
es.
mately right angles to the device.
● Slide the control panel into the de-
vice’s guides that are positioned on
the left and right at the lower edge
of the housing. Push the control
panel carefully into the bracket until
it clicks into place.
● Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, clean the contacts with
a lint-free cloth and some alcohol.
Detaching the control panel
● Flip up the control panel and care-
fully press it into the device until it
clicks into place.
● Press the
button 2.
The control panel opens out towards
you.
● Hold the control panel by its right
side and then pull the control panel
straight out of the bracket.
2.
1.
38
CONTROL PANEL
SWITCHING ON/OFF
Note:
Switching on/off
There are various ways of switching the
device on/off:
● When attaching the control panel,
make sure you do not press the
display.
Switching the device on/off using
the vehicle ignition
If the device was still switched on when
you removed the control panel, it will
automatically switch on with the last
settings activated (i.e. radio, CD/MP3,
CD changer or AUX) when the panel is
replaced.
If the device is correctly connected to
the vehicle’s ignition and you did not
switch it off by pressing button 1, the
device will switch on/off simultaneously
with the ignition.
Off timer
Switching the device on/off using
the detachable control panel
After you detach the control panel, the
device will switch off after a preset time
period. You can set this time to between
0 and 30 seconds.
● Detach the control panel.
The device switches off.
● Press the MENU button 9.
Note:
● Press the or button 7 repeat-
edly until “OFF TIMER” appears in
the display.
● The device will switch off after a
preset time period. For further de-
tails, read the section entitled “Off
timer”.
● Adjust the time using the
tons 7.
but-
● Attach the control panel again.
When you have finished making your
changes,
The device switches on. The last set-
ting (radio, CD/MP3, CD changer or
AUX) will be reactivated.
● press the MENU button 9 twice or
the OK button : twice.
Switching on/off using button 1
Note:
● To switch on the device, press but-
ton 1.
● If you set the off-timer to 0 sec-
onds, the device will switch off im-
mediately as soon as you open the
control panel.
● To switch off the device, press and
hold down button 1 for longer
than two seconds.
The device switches off.
Note:
● To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
39
SWITCHING ON/OFF
ADJUSTING THE VOLUME
Adjusting the volume
Switching on by inserting a CD
If the device is switched off and there is
no CD present in the drive,
You can adjust the volume in steps from
0 (off) to 66 (maximum).
● press the
button 2.
To increase the volume,
The flip-release panel opens.
● turn the volume control 5 clock-
● Gently insert the CD with its printed
side uppermost into the drive until
you feel some resistance.
wise.
To decrease the volume,
● turn the volume control 5 anti-
The drive draws in the CD automatical-
ly.
clockwise.
Setting the power-on volume
You can set the device’s default power-
on volume.
You must not hinder or assist the drive
as it draws in the CD.
● Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
● Press the MENU button 9.
● Press the or button 7 repeat-
edly until “ON VOLUME” appears
in the display.
The device switches on and starts play-
ing the CD.
Note:
● Adjust the power-on volume using
● If the ignition was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button 1 in order to
start playing the CD.
the
buttons 7.
To help you adjust the setting more eas-
ily, the device will increase or decrease
the volume as you make your changes.
If you change the setting to “LAST VOL”,
the volume when the device switches
on will be the same as the volume level
that was set the last time you switched
the device off.
Note:
● To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
than this when the device was last
switched off and the “LAST VOL”
setting is activated, the system will
reset the volume to “38” when you
switch the device on again.
40
ADJUSTING THE VOLUME
When you have finished making your
changes,
Telephone audio / navigation audio
If your car sound system is connected
to a mobile telephone or a navigation
system, the sound system’s volume will
be muted as soon as you “pick up” the
phone or as soon as a navigation an-
nouncement is made. You will then hear
the caller or navigation announcement
over the car sound system’s loudspeak-
ers. In order for this feature to work, the
mobile telephone or navigation system
must be connected to the car sound
system as described in the installation
instructions.
● press the MENU button 9 twice or
the OK button : twice.
Instantaneously decreasing the
volume (mute)
You can instantaneously decrease the
volume (mute) to a level preset by you.
● Briefly press button 1.
“MUTE” appears in the display.
Cancelling mute
To return to your previously set volume
level,
You will need a cable for this with the
following Blaupunkt number: 7 607 001
503.
● briefly press button 1 again.
You can find out from your Blaupunkt
dealer which navigation systems can be
used with your car sound system.
Setting the mute level
You can set the device’s mute volume
level.
If the sound system receives a traffic
announcement during a telephone call
or whilst a navigation announcement is
being made, you will only be able to hear
the traffic announcement after the call
or navigation announcement is finished
(in so far as the traffic announcement is
still being broadcast). The traffic an-
nouncement is not recorded!
● Press the MENU button 9.
● Press the or button 7 repeat-
edly until “MUTE LEVEL” appears
in the display.
● Adjust the mute level using the
buttons 7.
When you have finished making your
changes,
If, during a traffic announcement, a tel-
ephone call arrives or the navigation
system wants to output a spoken in-
struction, the traffic announcement will
be cancelled and the telephone call/
voice output can be heard.
● press the MENU button 9 twice or
the OK button : twice.
You can set the volume level at which
telephone calls or navigation announce-
ments will first be heard.
●
Press the MENU button 9.
41
ADJUSTING THE VOLUME
● Press the or button 7 repeat-
edly until “TEL/NAVI VOL” appears
in the display.
Automatic sound
This feature automatically adjusts the
volume of the car sound system to suit
the speed at which the vehicle is travel-
ling. In order for this to work, your car
sound system must be connected as
described in the installation instructions.
● Set your preferred volume level us-
ing the
buttons 7.
When you have finished making your
changes,
You can adjust the automatic volume
boost feature in six steps from (0 to 5).
● press the MENU button 9 twice or
the OK button : twice.
● Press the MENU button 9.
Note:
● Press the button 7 repeatedly
until “AUTO SOUND” appears in
the display.
● You can use the volume control 5
to adjust the volume of telephone
calls and navigation announce-
ments whilst you are listening to
them.
● Set the volume adjustment level
using the
buttons 7.
When you have finished making your
changes,
Setting the volume of the
confirmation beep
● press the MENU button 9 twice or
the OK button : twice.
The system will output a confirmation
beep for some functions if you keep a
button pressed down for longer than two
seconds, for instance, when assigning
a radio station to a station preset but-
ton. You can adjust the volume of this
beep.
Note:
● The optimum setting for the speed-
dependent volume adjustment fea-
ture depends on how noise levels
develop in your particular vehicle.
You will need to test various set-
tings in order to find out which is
best suited to your vehicle.
● Press the MENU button 9.
● Press the or button 7 repeat-
edly until “BEEP” appears in the
display.
● Adjust the volume using the
buttons 7. “OFF” means that the
beep is deactivated, “7” means that
the maximum beep volume is set.
When you have finished making your
changes,
● press the MENU button 9 or the
OK button :.
42
RADIO MODE
selected a setting other than “EU-
ROPE”, the relevant buttons, dis-
plays and menus will not work or
will not be displayed.
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
Switching to radio mode
If you are in CD/MP3, CD changer or
AUX mode,
The station name appears in the dis-
play as soon as the tuner receives it.
● press the BND•TS button 4.
or
Adjusting the tuner settings
● press the SRC button @ repeated-
ly until the memory bank (e.g.
To ensure that the tuner works proper-
ly, the device must be configured for the
region in which you are using it. You can
choose between Europe (EUROPE),
United States (AMERICA), SouthAmer-
ica (S-AMERICA) and Thailand (THAI).
By default, the tuner is set to the region
in which the device was sold. If you ex-
perience problems with radio reception,
please check this setting.
“FM1”) appears in the display.
Convenient RDS functions
The convenient RDS functions AF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
● AF: If you activate this RDS func-
tion, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
● Press the MENU button 9.
● Press the button 7 repeatedly
until “TUNER AREA” appears in
the display.
● REGIONAL: At certain times, some
radio stations divide their pro-
gramme into regional programmes
providing different content. You can
use the REGIONAL function to pre-
vent the car radio from switching to
alternative frequencies that are
transmitting different programme
content.
● Press the or button 7 to
switch between “EUROPE”,
“AMERICA”, “THAI” and “S-AMER-
ICA”.
● Press the MENU button 9 twice
or the OK button : twice.
Note:
Note:
● REGIONAL must be activated/de-
activated separately in the menu.
● The explanations provided for the
regional (REGIONAL), program
type (PTY) and traffic information
functions all relate to the “EU-
ROPE” tuner setting. If you have
43
RADIO MODE
Switching REGIONAL on/off
Tuning into a station
● Press the MENU button 9.
There are various ways of tuning into a
station.
● Press the or button 7 repeat-
edly until “REGIONAL” appears in
the display. “OFF” or “ON” is dis-
played alongside “REGIONAL”.
Automatic station seek tuning
● Press the or button 7.
The radio tunes into the next receiva-
ble station.
● To switch REGIONAL on/off, press
the or button 7.
Tuning into stations manually
● Press the MENU button 9 or the
OK button :.
You can also tune into stations manual-
ly.
Switching the RDS function on/off
Note:
If you want to use the RDS functions
(AF and REGIONAL),
● You can only tune into stations
manually if the RDS function is de-
activated.
● press the RDS button 3.
The RDS functions are active when
RDS lights up in the display.
● Press the or button 7.
Browsing through broadcasting
networks (only FM)
Selecting the waveband /
memory bank
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
This device can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) wave-
bands. There are three memory banks
available for the FM waveband (FM1,
FM2 and FMT) and one for each of the
MW and LW wavebands.
Note:
● The RDS function must be activat-
ed before you can use this feature.
● Press the or button 7 to
switch to the next station on the
broadcasting network.
Six stations can be stored in each mem-
ory bank.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
Note:
● When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the Scan or Travelstore func-
tion.
● briefly press the BND•TS button
4.
44
RADIO MODE
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
Storing stations
Storing stations manually
● Select the memory bank (i.e. FM1,
FM2, FMT) that you want or one of
the wavebands (MW or LW).
● Tune into the station that you want.
● Press the MENU button 9.
● Press and hold down one of the
station buttons 1 - 3 6 or 4 - 6 ;
for longer than two seconds to as-
sign the station to that button.
● Press the or button 7 repeat-
edly until “SENS” appears in the
display.
● Press the button 7.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
The display shows the currently set sen-
sitivity level. “SENS HI6” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
● Set the sensitivity level that you
want using the
buttons 7.
Note:
● Any stations that were previously
stored in this memory bank are de-
leted in the process.
When you have finished making your
changes,
● press the MENU button 9 or the
OK button :.
● Press and hold down the BND•TS
button 4 for longer than two sec-
onds.
Note:
● You can set different sensitivity lev-
els for FM and MW or LW (AM).
The storing procedure begins. “FM T-
STORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory
bank.
45
RADIO MODE
When you have finished making your
changes,
Listening to stored stations
● Select the memory bank or wave-
● press the MENU button 9 twice or
the OK button : twice.
band.
● Press the station button 1 - 3 6 or
4 - 6 ; that the station you want
to listen to is assigned to.
Note:
● The scanning time that you set is
also applied by the system to scan-
ning carried out in CD/MP3 and
CD-changer mode.
Scanning receivable stations
(SCAN)
You can use the scan function to briefly
play all the receivable stations. You can
set the scanning time in the menu to
between 5 and 30 seconds.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting. Your car radio can
receive and display this information.
Starting SCAN
● Press and hold down the OK but-
ton : for longer than two sec-
onds.
For example, the programme types can
be:
Scanning begins. “SCAN” appears
briefly in the display followed by a flash-
ing display of the current station name
or frequency.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
CLASSICS
You can use the PTY function to select
stations of a particular programme type.
Cancelling SCAN and continuing
listening to a station
PTY-EON
● Press the OK button :.
Scanning stops and the radio continues
playing the station that it tuned into last.
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Setting the scanning time
Note:
● Press the MENU button 9.
● If the tuner does not find a station
that corresponds to the selected
programme type, you will hear a
beep and “NO PTY” appears briefly
in the display. The radio will then
retune to the station that it received
last.
● Press the or button 7 repeat-
edly until “SCAN TIME” appears in
the display.
● Set the scanning time that you
want using the
buttons 7.
46
RADIO MODE
● If the tuned radio station or another When you have finished making your
station on the broadcasting net-
work broadcasts your selected pro-
gramme type at a later point in
time, the radio will automatically
changes,
● press the MENU button 9 twice or
the OK button : twice.
switch from the currently tuned sta- Selecting a programme type and
tion or from CD/MP3 mode or CD-
changer mode to the station whose
programme type matches the one
you selected.
starting seek tuning
● Press the or button 7.
The current programme type appears
in the display.
Switching PTY on/off
● If you want to select another pro-
gramme type, you can do so by
pressing the or button 7
whilst this display is visible.
● Press the MENU button 9.
● Press the or button 7 repeat-
edly until “PTY ON” or “PTY OFF”
appears in the display.
Or
● Press the or button 7 to
● Press one of the buttons 1 - 3 6
or 4 - 6 ; to select a programme
type that is assigned to one of
these buttons.
switch PTY ON or OFF.
If PTY is switched on, PTY lights up in
the display.
The selected programme type appears
briefly in the display.
● Press the MENU button 9 or the
OK button :.
● Press the or button 7 to start
Selecting the PTY language
seek tuning.
You can select the language in which
the programme types are displayed.
The following are available: “DEUT-
SCH”, “ENGLISH” and “FRANÇAIS”.
The radio will then tune into the next
station that it finds that corresponds to
your selected programme type.
Assigning a programme type to a
station button
● Press the MENU button 9.
● Press the or button 7 repeat-
edly until “PTY LANG” appears in
the display.
● Select a programme type using the
or button 7.
● Press and hold down the station
button 1 - 3 6 or 4 - 6 ; that you
want for longer than two seconds.
● Set your preferred language using
the
buttons 7.
The programme type will then be as-
signed to the selected button 1 - 3 6
or 4 - 6 ;.
47
RADIO MODE
TRAFFIC INFORMATION
Traffic information
Optimising radio reception
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Treble reduction feature during
interference (HICUT)
The HICUT function improves reception
during poor radio reception (only FM).
If interference occurs, the system auto-
matically reduces the treble thus reduc-
ing the interference level.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Switching HICUT on/off
● Press the MENU button 9.
Once the traffic report has been played,
the system will switch back to the pro-
gramme that you were listening to be-
fore.
● Press the or button 7 repeat-
edly until “HICUT” appears in the
display.
Switching traffic information
priority on/off
● Press the or button 7 to ad-
just the HICUT setting.
“HICUT 0” means that no automatic re-
duction of the treble and interference
level will be made; “HICUT 1” means
that a maximum reduction will be made.
● Press the TRAF button =.
Traffic announcement priority is active
when a traffic-jam symbol lights up in
the display.
● Press the MENU button 9 or the
OK button :.
Note:
You will hear a warning sound:
Configuring the display
● if you leave the reception area of a
traffic information station that you
are currently listening to.
You have the option in radio mode of
displaying the waveband together with
the memory location or time in the low-
er display area.
● if, while listening to a CD/MP3 or
CD in the changer, you leave the
reception area of a traffic informa-
tion station that the system is tuned
into, and the subsequent automatic
search cannot find a new traffic in-
formation station.
● Briefly press the DIS button 8 to
switch between the two options.
● if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
48
TRAFFIC INFORMATION
CD MODE
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
CD mode
You can use this device to play stand-
ard audio CDs, CD-Rs and CD-RWs
with a diameter of 12 or 8 cm.
Setting the volume for traffic
announcements
Besides being able to play audio CDs
on this device, you can also play CDs
containing MP3 music files. For further
details, read the chapter entitled “MP3
mode”.
● Press the MENU button 9.
● Press the or button 7 repeat-
edly until “TA VOLUME” appears in
the display.
Risk of severe damage to the
CD drive!
● Adjust the volume using the
buttons 7.
Contoured CDs (shape CDs) are not
suitable for playback in this unit.
We accept no responsibility for any
damage to the CD drive that may
occur as a result of the use of un-
suitable CDs.
When you have finished making your
changes,
● press the MENU button 9 twice or
the OK button : twice.
Switching to CD mode
● If there is no CD inserted in the
Note:
● Using the volume control 5, you
can also adjust the volume during
a traffic announcement for the du-
ration of that announcement.
drive,
● press the
button 2.
The flip-release panel opens.
Note:
● Gently insert the CD with its printed
side uppermost into the drive until
you feel some resistance.
● You can adjust the sound settings
and volume distribution settings for
traffic announcements. For further
details, refer to the chapter entitled
“Sound”.
The drive draws in the CD automatical-
ly.
You must not hinder or assist the drive
as it draws in the CD.
● Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
The CD starts playing.
49
CD MODE
Note:
Random track play (MIX)
● If the ignition was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button 1 in order to
start playing the CD.
● Press the 4 MIX button ;.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
● If a CD is already inserted in the
drive,
Cancelling MIX
● press the SRC button @ repeated-
● Press the 4 MIX button ; again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
ly until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
Scanning tracks (SCAN)
You can briefly play all the tracks on the
CD.
Selecting tracks
● Press one of the arrow buttons 7
to select the next or previous track.
● Press and hold down the OK but-
ton : for longer than two sec-
onds. The next track will then be
played briefly.
If you press the or button 7 once,
the player will play the current track
again from the beginning.
Fast track selection
Note:
● You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
To quickly select tracks backwards or
forwards,
● press and hold down one of the
buttons 7 until fast-reverse /
/
fast-forward track selection begins.
Stopping SCAN and continuing
listening to a track
Fast searching (audible)
To fast search backwards or forwards,
● To stop scanning, press the OK
button :.
● press and hold down one of the
buttons 7 until fast searching
backwards / forwards begins.
The currently scanned track will then
continue to be played normally.
50
CD MODE
To switch between the display options,
Repeating tracks (REPEAT)
If you want to repeat a track,
● press the 5 RPT button ;.
“REPEATTRACK” appears briefly in the
display and the RPT symbol lights up.
The track is repeated continuously until
you deactivate RPT.
● press the DIS button 8 repeatedly
until the display that you want ap-
pears.
Displaying CD text
Some CDs include CD text. The CD text
might contain the names of the artist,
album and tracks.
Cancelling REPEAT
You can allow the CD text to be dis-
played as scrolling text every time you
switch to another track. The standard
display will appear again after the whole
If you want to deactivate the repeat func-
tion,
● press the 5 RPT button ; again.
“REPEAT OFF” appears briefly in the CD text has been shown once. For fur-
display and the RPT symbol disappears. ther information, read the section enti-
Normal playback is then resumed.
tled “Changing the display”.
Switching CD text on/off
Pausing playback (PAUSE)
● Press the 6 button ;.
“PAUSE” appears in the display.
● Press the MENU button 9.
● Press the or button 7 repeat-
edly until “CD TEXT” appears in
the display.
Cancelling pause
● Press the 6 button ; while in
● Switch the CD text function on
(“TEXT ON”) or off (“TEXT OFF”)
using the or button 7.
pause mode.
Playback is resumed.
When you have finished making your
changes,
Changing the display
You can choose from various display
options in CD mode:
● press the MENU button 9 twice or
the OK button : twice.
● Track number, playing time and
clock time
Scrolling CD text
● Track number, CD name and clock
If the CD that is inserted in the drive
contains CD text, you can make the
system display the text during playback.
time
● Track number, CD name and play-
ing time
● Briefly press the 1 SCL button 6.
51
CD MODE
Naming CDs
● Use the
/
buttons 7 to select
“CD NAME”.
The car sound system allows you to
assign names for up to 30 CDs so that
you can recognise them more easily.
The names can be up to eight charac-
ters long.
● Press the or button 7.
● Press and hold down the MENU
button 9. You will hear a beep af-
ter four seconds and “DELETE
NAME” appears in the display.
“CD NAME FULL” will appear in the dis-
play if you try assigning more than 30
names.
● Let go of the MENU button 9.
The CD name will be deleted.
To return to the menu,
Entering/editing CD names
● Listen to the CD that you want.
● Press the MENU button 9.
● press the MENU button 9 twice or
the OK button : twice.
● Use the
“CD NAME”.
buttons 7 to select
Deleting all CD names
You can delete all the CD names stored
in the car sound system.
● Press the or button 7 twice.
You will now enter editing mode. If your
CD has not been named yet, eight un-
derscores will appear in the display.
The currently active input position flash-
es.
● Listen to a CD.
● Press the MENU button 9.
● Use the
/
buttons 7 to select
“CD NAME”.
● Use the
/
buttons 7 to select
● Press the or button 7.
the character that you want. If you
want an empty space, simply se-
lect the underscore.
● Press and hold down the MENU
button 9. You will hear a beep af-
ter four seconds and “DELETE
NAME” appears in the display.
Continue holding the button
● Use the or button 7 to move
from one input position to another.
pressed down until you hear a sec-
ond beep and “DELETE ALL” ap-
pears in the display.
● To save the name, press the
MENU button 9 twice or the OK
button : twice.
● Let go of the MENU button 9.
The CD names will be deleted.
To return to the menu,
Deleting a CD name
● Listen to the CD whose name you
want to delete.
● press the MENU button 9 twice or
the OK button : twice.
● Press the MENU button 9.
52
CD MODE
MP3 MODE
Traffic announcements in CD
mode
If you wish to receive traffic announce-
ments in CD mode,
MP3 mode
You can also use this car sound sys-
tem to play CD-Rs and CD-RWs that
contain MP3 music files.
MP3 is a process developed by the
Fraunhofer Institute for compressing CD
audio data. Compression allows data to
be reduced to around 10% of their orig-
inal size without a noticeable loss in
quality (at a bit rate of 128 kbit/s). If a
lower bit rate is used to convert CD au-
dio data to MP3, you will be able to cre-
ate smaller files but this will be accom-
panied by a loss in audio quality.
● press the TRAF button =.
Traffic announcement priority is active
when a traffic-jam symbol lights up in
the display. For further details, read the
chapter entitled “Traffic information re-
ception”.
Ejecting a CD
● Press the
button 2.
The flip-release panel opens out to-
wards you.
Preparing an MP3-CD
The various combinations of CD burn-
ers, CD burning software and CD blanks
may lead to problems arising with the
device’s ability to play certain CDs. If
problems occur with your own burned
CDs, you should try another brand of
CD blank or choose another colour of
CD blank.
● Press the eject button A next to
the CD compartment.
The CD is ejected.
● Remove the CD and close the con-
trol panel.
Note:
● If a CD is ejected, the drive will au-
tomatically draw it back in again
after 10 seconds.
The format of the CD must be ISO 9660
Level 1 / Level 2 or Joliet. Other formats
cannot be played reliably.
● You can also eject CDs whilst the
device is switched off or whilst an-
other audio source is activated.
You can create a maximum of 253 di-
rectories on a CD. You can use this de-
vice to access each of these directo-
ries.
Regardless of the number of directories
on the CD, the device can handle up to
65,535 MP3 files on a single CD - even
if they are all stored in one directory.
53
MP3 MODE
This device supports as many subdirec- Note:
tories as your burner software can cre- ● When naming directories and
ate despite the fact that the maximum
directory depth defined by the ISO 9660
standard is only 8.
tracks/files you should avoid using
accents and special characters.
You can use a maximum of 32
characters (including the “.MP3” file
extension) for track names and di-
rectory names.
D
i
r
D01
If you like your files to be in the correct
order, you should use burner software
that places files in alphanumerical or-
der. If your software does not provide
this feature you also have the option of
sorting the files manually. To do so, you
should place a number (e.g. “001”,
“002”, etc.) at the beginning of each file
name - you must include the leading
zeros.
e
c
t
D02
D03
o
r
i
e
s
D04
T001
T001
T002
T003
T004
T005
T002
T003
T004
T005
T006
T007
T008
T009
T010
T011
T
r
a
c
k
s
¥
F
i
MP3 tracks can contain additional in-
formation such as the artist, album and
track names (ID3 tags). This device can
display ID3 tags if they are version
type 1.
T001
T002
T003
T004
T005
T006
l
e
s
When creating (encoding) MP3 files
from audio files, you should use bit rates
up to a maximum of 256 kbits/sec.
This device can only play MP3 files that
have the “.MP3” file extension.
JYou can name each directory using a
PC. The device is capable of displaying
the directory name. Name the directo-
ries and tracks/files using your CD burn-
er software. The software’s instruction
manual will provide details on how to
do this.
Note:
To ensure uninterrupted playback,
● do not try changing the file exten-
sion to “.MP3” of any files other
than MP3 files and then attempt to
play them! (The device will ignore
these invalid files during playback.)
54
MP3 MODE
● Do not use “mixed” CDs containing
both non-MP3 data and MP3
Selecting tracks/files
To move up or down to another track/
file in the current directory,
tracks (the device will only read
MP3 files during MP3 playback).
● press the or button 7 once or
● Do not use mix-mode CDs contain-
ing both CD-audio tracks and MP3
tracks. If you try playing a mix-
mode CD, the device will only play
the CD-audio tracks.
several times.
If you press the button 7 once, the
current track will be played again from
the beginning.
Fast searching
Switching to MP3 mode
To fast search backwards or forwards,
MP3 mode is activated in the same way
as normal CD mode. For further details,
please read the section entitled “Switch-
ing to CD mode” in the “CD mode” chap-
ter.
● press and hold down the or
button 7 until fast searching back-
wards / forwards begins.
Random track play (MIX)
To play the tracks in the current directo-
ry in random order,
Selecting a directory
To move up or down to another directo-
ry,
● briefly press the 4 MIX button ;.
“MIX DIR” appears in the display and
the MIX symbol lights up.
● press the or button 7 once or
several times.
Note:
To play all the tracks on the inserted
MP3-CD in random order,
● The device will automatically skip
any directories that do not contain
MP3 files. The device will automati-
cally correct the number of directo-
ries for the display. This new
number will therefore no longer be
identical to the number of directo-
ries that you actually created.
● press and hold down the 4 MIX
button ; for longer than two sec-
onds.
“MIX CD” appears in the display and the
MIX symbol lights up.
Cancelling MIX
To cancel MIX,
● briefly press the 4 MIX button ;.
“MIX OFF” appears in the display and
the MIX symbol disappears.
55
MP3 MODE
Cancelling REPEAT
Scanning tracks (SCAN)
To stop the current track or current di-
rectory from being repeated,
You can briefly play all the tracks on the
CD.
● briefly press the 5 RPT button ;.
“REPEAT OFF” appears briefly and
RPT disappears from the display.
● Press and hold down the OK but-
ton : for longer than two sec-
onds. The next track will then be
played briefly.
Pausing playback (PAUSE)
● Press the 6 button ;.
“PAUSE” appears in the display.
“TRACK SCAN” appears in the display
alongside the flashing track numbers.
The tracks on the CD are briefly played
in ascending order.
Cancelling pause
Note:
● Press the 6 button ; while in
● You can set the scanning time. For
further details on setting the scan-
ning time, please read the section
entitled “Setting the scanning time”
in the “Radio mode” chapter.
pause mode.
Playback is resumed.
Configuring the display
Configuring the default display
Stopping SCAN and continuing
listening to a track
You can display various information on
the current track:
● Briefly press the OK button :.
The currently scanned track will then
continue to be played normally.
● Track number, playing time and di-
rectory number
● Track number, playing time and
Repeating individual tracks or
whole directories (REPEAT)
To play the current track repeatedly,
clock time
After you switch tracks, the device first
displays the MP3 scrolling text once and
then it displays the above information
continuously.
● briefly press the 5 RPT button ;.
“REPEATTRACK” appears briefly in the
display and RPT lights up.
To switch between the different display
options,
To repeat the whole directory,
● press the DIS button 8.
● press and hold down the 5 RPT
button ; for longer than two sec-
onds.
“REPEAT DIR” appears briefly in the
display.
56
MP3 MODE
Configuring the MP3 scrolling text
Displaying MP3 scrolling text
You can configure the device to display To display the selected MP3 scrolling
one of the following scrolling texts eve- text again during playback,
ry time you change the track. The de-
vice displays the scrolling text once.
● briefly press the 1 SCL button 6.
Note:
After the device has displayed the scroll-
ing text it returns to the default display
(see above). The available display op-
tions are:
● If you selected the artist, album or
track name as scrolling text and the
MP3 track does not contain this in-
formation, the device will not dis-
play anything if you press the 1
SCL button.
● Directory name
● File name
● Artist name
● Track name
● Album name
Note:
● The artist, track and album names
are part of the MP3-ID tag (version
1) and can only be displayed if they
have been saved with the MP3
files (for further information, read
the instructions that came with your
PC’s MP3 software or burner soft-
ware).
To switch between the different display
options,
● press the MENU button 9.
● Press the or button 7 repeat-
edly until “MP3 DISPLAY” appears
in the display.
● Using the or button 7 to se-
lect the type of MP3 scrolling text
that you want.
When you have finished making your
changes,
● press the MENU button 9 twice or
the OK button : twice.
57
CD-CHANGER MODE
CD-changer mode
Changing the display
There are two display options available:
Note:
● Track number, playing time and
● Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
clock time
● Track number, playing time and CD
number
To switch between the display options,
Switching to CD-changer mode
● press the DIS button 8.
● Press the SRC button @ repeat-
edly until “CHANGER” appears in
the display.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
The device starts playing the first CD
that the CD changer detects.
● briefly press the 5 RPT button ;.
“REPEAT TRACK” appears briefly and
RPT lights up in the display.
Selecting CDs
To move up or down to another CD,
To repeat the current CD,
● press the or button 7 once or
● press and hold down the 5 RPT
button ; for longer than two sec-
onds.
several times.
Note:
● The device will ignore empty CD
slots in the changer and slots con-
taining invalid CDs.
“REPEAT DISC” appears briefly and
RPT lights up in the display.
Cancelling REPEAT
Selecting tracks
To move up or down to another track
on the current CD,
To stop the current track or current CD
from being repeated,
● briefly press the 5 RPT button ;.
“REPEAT OFF” appears and RPT dis-
appears from the display.
● press the or button 7 once or
several times.
Fast searching (audible)
To fast search backwards or forwards,
● press and hold down one of the
buttons 7 until fast searching
backwards / forwards begins.
58
CD-CHANGER MODE
Note:
Random track play (MIX)
● You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
To play the tracks on the current CD in
random order,
● briefly press the 4 MIX button ;.
“MIX CD” appears briefly and MIX lights
up in the display.
Pausing playback (PAUSE)
● Press the 6 button ;.
“PAUSE” appears in the display.
To play the tracks on all inserted CDs in
random order,
● press and hold down the 4 MIX
button ; for longer than two sec-
onds.
Cancelling pause
● Press the 6 button ; while in
pause mode.
“MIX ALL” appears briefly and MIX
lights up in the display.
Playback is resumed.
Cancelling MIX
● Briefly press the 4 MIX button ;.
“MIX OFF” appears and MIX disappears
from the display.
Scanning all tracks on all CDs
(SCAN)
To briefly play all the tracks on all the
inserted CDs in ascending order,
● press and hold down the OK but-
ton : for longer than two sec-
onds.
“TRACK SCAN” appears in the display
and the number of the current track
flashes.
Stopping SCAN
To stop scanning,
● briefly press the OK button :.
The currently scanned track will then
continue to be played normally.
59
CLOCK - TIME
● Press the or button 7 to
CLOCK - Time
switch between the modes.
Briefly displaying the time
When you have finished making your
changes,
You can make the time appear continu-
ously in the bottom part of the display
while any audio source is activated. For
further information on this, read the rel-
evant sections in the relevant chapters.
● press the MENU button 9 or the
OK button :.
Displaying the time continuously
when the device is off and the
ignition is on
Setting the clock time
To set the clock time,
To display the time when the device is
off and the vehicle ignition is on,
● press the MENU button 9.
● Press the or button 7 repeat-
edly until “CLOCK SET” appears in
the display.
● press the MENU button 9.
“MENU” appears in the display.
● Press the or button 7 repeat-
edly until “CL DISP OFF” or
“CL DISP ON” appears in the dis-
play.
● Press the button 7.
The time appears in the display. The
minutes flash and can be adjusted.
● Adjust the minutes using the
buttons 7.
/
● Press the or button 7 to
switch between the ON/OFF set-
tings.
Once the minutes are set,
● press the button 7.
The hours flash.
When you have finished making your
changes,
● press the MENU button 9 or the
OK button :.
● Adjust the hours using the
buttons 7.
/
● Press the MENU button 9 twice
or the OK button : twice.
Selecting 12/24-hour clock
mode
● Press the MENU button 9.
“MENU” appears in the display.
● Press the or button 7 repeat-
edly until “24 H MODE” or “12 H
MODE” appears in the display.
60
SOUND
When you have finished making your
changes,
Sound
You can adjust the sound settings (bass
and treble) separately for each source
(radio, CD/MP3, CD changer,AUX, traf-
fic announcement, telephone/naviga-
tion). The volume distribution settings
● press the AUDIO button >.
Setting the left/right volume
distribution (balance)
(balance and fader) apply to all the au- To adjust the left/right volume distribu-
dio sources.
tion (balance),
● press the AUDIO button >.
“BASS” appears in the display.
Note:
● You can only adjust the audio set-
tings for traffic announcements and
the navigation system whilst a traf-
fic announcement or navigation an-
nouncement is actually playing.
Likewise, you can only adjust the
telephone audio settings during a
telephone call.
● Press the button 7 repeatedly
until “BALANCE” appears in the
display.
● Press the or button 7 to ad-
just the balance (right/left).
When you have finished making your
changes,
Adjusting the bass
● press the AUDIO button >.
● Press the AUDIO button >.
“BASS” appears in the display.
Adjusting the front/back volume
distribution (fader)
To adjust the front/back volume distri-
bution (fader),
● Press the or button 7 to ad-
just the bass.
When you have finished making your
changes,
● press the AUDIO button >.
● press the AUDIO button >.
“BASS” appears in the display.
● Press the button 7 repeatedly
until “FADER” appears in the dis-
play.
Adjusting the treble
● Press the AUDIO button >.
“BASS” appears in the display.
● Press the or button 7 to ad-
● Press the button 7 repeatedly
until “TREBLE” appears in the dis-
play.
just the fader (front/back).
When you have finished making your
changes,
● Press the or button 7 to ad-
● press the AUDIO button >.
just the treble.
61
SOUND
X-BASS
Equalizer presets
X-BASS
This device is equipped with an equal-
izer that has been preset with settings
for the “ROCK”, “POP” and “CLASSIC”
music styles.
The X-BASS feature can be used to
boost the bass at low volume levels.
Note:
● You can adjust the X-Bass settings
separately for each audio source
(radio, CD/MP3, CD changer and
AUX).
To select an equalizer preset,
● press the AUDIO button >.
“BASS” appears in the display.
Adjusting the X-BASS boost
settings
● Press the button 7 repeatedly
until “EQ POP”, “EQ ROCK”, “EQ
CLASSIC” or “EQ OFF” appears in
the display.
You can set the X-BASS boost in steps
ranging from 1 to 3.
● Press the or button 7 to se-
lect one of the presets or select
“EQ OFF” to switch off the equaliz-
er. DEQ lights up in the display if
you select one of the presets.
“X-BASS OFF” means that the X-BASS
feature is switched off.
● Press the X-BASS button ?.
● Press the or button 7 repeat-
edly until the setting that you want
appears in the display.
When you have finished making your
changes,
When you have finished making your
changes,
● press the AUDIO button >.
● press the X-BASS button ?.
62
CONFIGURING THE LEVEL DISPLAY / ADJUSTING THE BRIGHTNESS
● Press the or button 7 repeat-
edly until “DIM DAY” or “DIM
Configuring the level
display
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst you
are adjusting them.
NIGHT” appears in the display.
● Press the or button 7 to
switch between the brightness lev-
els.
When you have finished making your
changes,
When you are not changing any set-
tings, the level display depicts the sound
system’s output level. You can switch
the level display on/off.
● press the MENU button 9 twice or
the OK button : twice.
● Press the MENU button 9.
“MENU” appears in the display.
Adjusting the viewing angle
● Press the or button 7 repeat-
edly until “PEAK LEVEL” appears
in the display.
Since vehicle manufacturers all provide
different installation positions for car radi-
os in their vehicles, the installation angles
are different too. This can result in the dis-
play being difficult to read when the car
radio is installed in certain positions.
● Press the or button 7 to
switch between “PEAK LVL ON”
and “PEAK LVL OFF”.
If this is the case, it is absolutely neces-
sary that you configure the display to suit
this angle.
When you have finished making your
changes,
● press the MENU button 9 twice or
the OK button : twice.
To do so, please proceed as follows:
● Press the MENU button 9.
● Press the or button 7 repeat-
edly until “VIEW ANGLE” appears
in the display.
Adjusting the brightness
(dimmer)
The display brightness will change when
the headlights are turned on/off if your
car sound system is connected as de-
scribed in the installation instructions
and your vehicle is equipped with the
appropriate connections. You can ad-
just the display brightness separately for
night and day in steps ranging from 1 -
9. We recommend a setting of “6”.
● Press the or button 7 to ad-
just the viewing angle (-4 ... +4).
When you have finished making your
changes,
● press the MENU button 9 twice or
the OK button : twice.
● Press the MENU button 9.
“MENU” appears in the display.
63
EXTERNAL AUDIO SOURCES
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output.Audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
TMC
TMC for dynamic navigation
systems
TMC stands for “Traffic Message Chan-
nel.” Traffic reports are broadcast digit-
ally using TMC, which means they can
be used by compatible navigation sys-
tems during route planning. Your car
sound system has a TMC output, which
you can use for connecting Blaupunkt
navigation systems. You can find out
from your Blaupunkt dealer which nav-
igation systems can be used with your
car sound system.
The AUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
If a navigation system is connected and
a TMC station is being received, TMC
lights up in the display.
Switching the AUX input on/off
● Press the MENU button 9.
“MENU” appears in the display.
If dynamic navigation is active, the sys-
tem will tune into a TMC station auto-
matically.
● Press the or button 7 repeat-
edly until “AUX OFF” or “AUX ON”
appears in the display.
● Press the or button 7 to
switch AUX on/off.
When you have finished making your
changes,
● press the MENU button 9 or the
OK button :.
Note:
● If the AUX input is switched on, you
can select it by pressing the SRC
button @.
64
SPECIFICATIONS
CD
Specifications
Frequency response:
Amplifier
20 - 20,000 Hz
3 V
Output power:
4 x 25 watts sine
in accordance
with DIN 45 324 at
14.4 V
Pre-amp Out
4 channels:
4 x 45 watts max.
power
Input sensitivity
AUX input
: 2 V / 6 kΩ
: 10 V / 1 kΩ
Tuner
Wavebands in Europe:
Tel./Navi input
FM
MW :
LW
:
87.5 - 108 MHz
531 - 1602 kHz
153 - 279 kHz
:
Wavebands in the United States:
FM
AM
:
:
87.5 - 107.9 MHz
530 - 1710 kHz
Wavebands in Thailand and Asia:
FM
AM
:
:
87.5 - 108 MHz
531 - 1602 kHz
FM frequency response:
35 - 16,000 Hz
Subject to changes!
65
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Número de
serviço / Servicenumre
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5444
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-4598830
02-369 62464
40 2085
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 210 94 27 337
(IRL) 01-4149400
(I)
02-369 62331
40 4078
Luxembourg (L)
Netherlands (NL) 023-565 6348
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
01-2185 00144
902-120234
08-7501500
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0441
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
01-333 9575
Poland
(PL) 0800-118922
(TR) 0212-3350677
(USA) 800-2662528
Turkey
USA
0212-3460040
708-6817188
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
02/04
CM/PSS 8 622 403 883
|